Configuring parameters
KNX Sonos -Gateway
MR-SONOS-REG
© 2019 Albrecht J ung GmbH & Co. KG
p. 69 / 118
10
Configuring parameters
The tabs are then briefly des cribed in the <<Parameter>> view. Refer to the s pecific s ections for precis e de-
tails .
Figure 19: Parameters in ETS
1)
Settings that are valid for all connected Sonos devices .
2)
Configuration of master-s lave groups .
3)
Configuration area: The parameters of the s elected tab are configured here.
10.1.1
<<General>> tab (general settings)
The default value of each parameter is marked in
bold
.
Parameters
Entry/Selection
Remarks
Configuration of the mas -
ter-s lave groups
Automatic detection
(only a master without
slaves)
Any available Sonos device from the local network
is s elected automatically and us ed as a mas ter of
the firs t group.
Do not us e this mode if multiple Sonos
devices are available on the local net-
work.
The s election can change at any time if
another Sonos device is detected.
