Commis s ioning and configuration
KNX Sonos -Gateway
MR-SONOS-REG
© 2019 Albrecht J ung GmbH & Co. KG
p. 52 / 118
8.2
Configuration
The device is configured in the ETS (Engineering Tool Software). The ETS is available with various ranges of
functions from the KNX Ass ociation (www.knx.org).
All des criptions in this documentation relating to commis s ioning in the ETS refer to the variant "ETS Profes-
s ional" in the vers ion 5.
"ETS" s oftware help is available in the integrated ETS Online Help.
Pres s the [F1] button.
Before configuration:
Work step
Details in the section
1.
Ins tall the device.
2.
Connect the Sonos s ys tem to the data network and s et it up
with the help of the s oftware supplied with the Sonos com-
ponents .
See Sonos documents
3.
Ins tall the KNX Sonos -Gateway on the s ame IP network as
the Sonos components and make s ettings on the IP network
router if neces s ary.
See Sonos documents
See the router documentation
8.2.1
Overview of configuration
Work step
Details in the section
1.
Creating KNX Sonos-Gateway as the device in the ETS.
►
Creating the device in the ETS., p. 53
2.
In the ETS, as s ign the phys ical addres s of the device so as it
corres ponds to the KNX topology.
3.
Either s elect the option <<Get IP addres s (of a DHCP s erver)
automatically>> for the device or enter the following s et-
tings manually:
•
IP addres s
•
IP s ubnet mas k
•
Standard gateway addres s
►
Setting the IP addres s , IP subnet
mas k and standard gateway addres s ,
p. 54
4.
Set the general parameters .
Configuring parameters , p. 69
5.
Create s tereo pairs in the Sonos s oftware if required.
See Sonos documents
6.
Configure the master-s lave groups : If you have s elected a
number of groups in the drop-down lis t in the general s et-
tings in the setting <<Configuration of the mas ter s lave
groups >>, individual <<Group <n>>> tabs are now available.
7.
Link the group addres s es to the communication objects .
