Art. No. DS 4092 TS
Behaviour at the
beginning of the
disabling function
No reaction
up
Down
Toggle
With an active disable, the input is
disabled. This parameter specifies the
command transmitted via the "Long time
operation" object at the beginning of the
disabling. "TOGGLE" switches over the
current object value.
Behaviour at the end of
the disabling function
No reaction
up
Down
Toggle
With an active disable, the input is
disabled. This parameter specifies the
command transmitted via the "Long time
operation" object at the end of the
disabling. "TOGGLE" switches over the
current object value.
h
Ex - disable (X = 1, 2, 3) - Only for "Value transmitter" function!
Disabling function
disabled
enabled
The extension inputs can be separately
disabled via the bus using 1-bit objects.
With an active disabling function, signal
edges at the input are ignored by the
device related to the affected objects.
This parameter enables the disabling
function of the input.
Polarity of the disabling
object
disable = 1 /
enable = 0
disable = 0 /
enable = 1
This parameter defines the polarity of
the disabling object.
Behaviour at the
beginning of the
disabling function
No reaction
Reaction as rising edge
Reaction as falling edge
Transmit current input
status
With an active disable, the input is
disabled. This parameter specifies the
command transmitted via the value
object at the beginning of the disabling.
In the "Transmit current input status"
setting, the device evaluates the static
signal status of the input and, according
to this, transmits the appropriately
configured telegram to the bus (contact
closed at the input = telegram as with
rising edge; contact open at input =
telegram as with falling edge).
The selection of the settings of this
parameter depends on the configured
edge evaluation of the input.
Behaviour at the end of
the disabling function
No reaction
Reaction as rising edge
Reaction as falling edge
Transmit current input
status
With an active disable, the input is
disabled. This parameter specifies the
command transmitted via the value
object at the end of the disabling.
In the "Transmit current input status"
setting, the device evaluates the static
signal status of the input and, according
to this, transmits the appropriately
Page 137 of 143
Software "Rotary sensor with extensions 10FE1x"
Parameters
