Art. No. DS 4092 TS
"Function value adjustment = enabled"!
Step width
1 °C
For temperature values, the step width
of the adjustment is fixed to 1°C.
This parameter is only visible with
"Function = temperature value
transmitter" and with enabled value
adjustment!
Step width
50 lux
For brightness values, the step width of
the adjustment is fixed to 50 lux.
This parameter is only visible with
"Function = brightness value transmitter"
and with enabled value adjustment!
Step width
1
2
5
10
20
50
75
100
200
500
750
1000
The step width of the value adjustment
for the 0...65535 value transmitter is set
here.
This parameter is only visible with
"Function = value transmitter 0...65535"
and only with enabled value adjustment!
Value adjustment with
overflow
yes
no
If, during the value adjustment, the
device with the function "value
transmitter 0...65535" detects that the
preset step width will exceed the limits
with the next telegram, the device
adapts the step width once in such a
way that the corresponding limit value is
transmitted together with the last
telegram. With the temperature or
brightness value transmitter it is not
necessary to adapt the step width to the
range limits based on the permanent
step widths.
Depending on the setting of this
parameter, the device stops the
adjustment at this point or inserts a
pause consisting of two increments and
then continues the adjustment beginning
with the other limit value.
This parameter is only visible on
"Function value adjustment = enabled"!
Time for standstill after
each operation
300ms
500 ms
1 sec
2 sec
The device differentiates between
different operations based upon the time
that the rotary knob stands still after a
completed operation. This standstill time
Page 119 of 143
Software "Rotary sensor with extensions 10FE1x"
Parameters
