Art. No. DS 4092 TS
(Object = "0" -> LED = OFF /
Object = "1" -> LED = ON).
inverted status display
Irrespective of the configuration of the
rotary knob, the status LED can indicate
the state of a separate LED
communication object. Here, the LED
can be switched on or off statically via
the 1-bit object value received. In this
setting, the object value is displayed in
inverted form by the LED
(Object = "0" -> LED = ON /
Object = "1" -> LED = OFF).
h
RK - Disabling function (visible only if the disabling function is enabled!)
The disabling function has the same configuration options as the rotary knob itself (see Rotary
knob).
h
PB/RK - Buzzer (only visible with enabled buzzer!)
Signalling function
The device has an acoustic buzzer
(Piezo signal transmitter) that can be
used for acknowledgement or status
signalling. Additionally, the integrated
buzzer can signal a warning or ring tone,
an alarm and an active programming
mode.
Acknowledgement
signalling
When the buzzer works as
acknowledgement signalling, it outputs a
single tone with an adjustable signal
duration during an operation of the
rotary knob or push-button. In addition, a
signal occurs when a storage telegram
is transmitted in the function "Scene
extension" or when a telegram is
transmitted for the value adjustment in
the function "value transmitter".
Telegram acknowledgment Alternatively, the telegram
acknowledgment can be configured for
acknowledgement signalling. The
telegram acknowledgment only signals
the transmission of telegrams in the
function "2-channel operation" (signal
duration 250 milliseconds), the
transmission of a scene storage
telegram or the transmission of
telegrams for value adjustment (not with
"Value transmitter comfort 0…255") in
the described signal lengths. Other
operations of the rotary knob or push-
button are not signalled after the
telegram acknowledgement.
Status signalling
(via object)
inverted status signalling
(via object)
pulsating status signalling
As a further alternative to
acknowledgement signalling or telegram
acknowledgment, it is possible to
activate the buzzer as status signalling
via a communication object of its own.
During the status signalling, it is possible
to distinguish whether the buzzer
Page 122 of 143
Software "Rotary sensor with extensions 10FE1x"
Parameters
