Art. No. DS 4092 TS
The following parameters are visible for the function "Switching"...
Command on pressing
the button
no reaction
ON
OFF
TOGGLE
These parameters specify the reaction
when the button is pressed or released.
Command on releasing
the button
no reaction
ON
OFF
TOGGLE
The following parameters are visible for the function "Dimming"...
Command on pressing
the button
Brighter (ON)
Darker (OFF)
Brighter / darker
(TOGGLE)
Brighter (TOGGLE)
Darker (TOGGLE)
This parameter defines the reaction
when the button is pressed.
If the push-button is to toggle on a brief
press, the corresponding switching
objects of other sensors with the same
function must be linked with one
another. In the "Brighter/darker
(TOGGLE)" setting, the dimming objects
must be interlinked as well so that the
correct telegram can be transmitted on
the next button-press.
Time between switching
and dimming
(100...50000 x 1 ms)
100...
400
...50000
This parameter defines how long the
button must be pressed for the
pushbutton sensor to transmit a
dimming telegram.
Advanced parameters
deactivated
activated
When the advanced parameters are
activated, the ETS shows the following
parameters.
Advanced parameters
activated...
Increase brightness by
1.5 %
3 %
6 %
12.5 %
25 %
50 %
100 %
This parameter sets the relative
dimming level when the brightness is
increased. On each button-press, the
brightness is changed at maximum by
the configured step width.
Especially with smaller dimming levels it
is advisable for the push button sensor
to repeat the dimming telegrams
automatically (see "telegram repetition").
Reduce brightness by
1.5 %
3 %
6 %
12.5 %
25 %
This parameter sets the relative
dimming level when the brightness is
reduced. On each button-press, the
brightness is changed at maximum by
the configured step width.
Page 99 of 143
Software "Rotary sensor with extensions 10FE1x"
Parameters
