Art. No. DS 4092 TS
transmits the appropriately configured
telegram to the bus (contact closed at
the input = telegram as with rising edge;
contact open at input = telegram as with
falling edge).
h
Ex - disable (X = 1, 2, 3) - Only for "Dimming" function!
Disabling function
disabled
enabled
The extension inputs can be separately
disabled via the bus using 1-bit objects.
With an active disabling function, signal
edges at the input are ignored by the
device related to the affected objects.
This parameter enables the disabling
function of the input.
Polarity of the disabling
object
disable = 1 /
enable = 0
disable = 0 /
enable = 1
This parameter defines the polarity of
the disabling object.
Behaviour at the
beginning of the
disabling function
No reaction
ON
OFF
TOGGLE
With an active disable, the input is
disabled. This parameter specifies the
command transmitted via the
"Switching" object at the beginning of
the disabling. "TOGGLE" switches over
the current object value.
Behaviour at the end of
the disabling function
No reaction
OFF
With an active disable, the input is
disabled. This parameter specifies the
command transmitted via the
"Switching" object at the end of the
disabling.
h
Ex - disable (X = 1, 2, 3) - Only for "Venetian blind" function!
Disabling function
disabled
enabled
The extension inputs can be separately
disabled via the bus using 1-bit objects.
With an active disabling function, signal
edges at the input are ignored by the
device related to the affected objects.
This parameter enables the disabling
function of the input.
Polarity of the disabling
object
disable = 1 /
enable = 0
disable = 0 /
enable = 1
This parameter defines the polarity of
the disabling object.
Page 136 of 143
Software "Rotary sensor with extensions 10FE1x"
Parameters
