Art. No. DS 4092 TS
Function:
Dimming
Object
h
8
Function
Dimming
Name
Rotary knob
disabling function -
output
Type
4-bit
DPT
1.007
Flag
C, W, T,
(R)
1
Description
4-bit object for the transmission of relative dimming telegrams.
Function:
Dimming
Object
h
9
Function
Feedback brightness value
Name
Rotary knob
disabling function -
input
Type
1 byte
DPT
5.001
Flag
C, W, -, (R)
2
Description
1-byte object for receiving a brightness value feedback of a dimmer actuator.
Only visible in the operation concepts "dimming with OFF telegram" or
"dimming comfort with OFF telegram".
Function:
Venetian blind
Object
h
7
Function
Short time operation
Name
Rotary knob
disabling function -
output
Type
1-bit
DPT
1.007
Flag
C, -, T, (R)
1
Description
1-bit object for the transmission of telegrams with which a Venetian blind or
shutter drive motor can be stopped or with which the blind slats can be
adjusted by short time operation.
Function:
Venetian blind
Object
h
8
Function
Long-time operation
Name
Rotary knob
disabling function -
output
Type
1-bit
DPT
1.008
Flag
C, W, T,
(R)
1
Description
1-bit object for the transmission of telegrams with which a Venetian blind or
shutter drive motor can be can be moved upwards or downwards.
Function:
1-byte value transmitter
Object
h
7
Function
Value
Name
Rotary knob
disabling function -
output
Type
1 byte
DPT
5.xxx
Flag
C, W, T,
(R)
1
Description
1-byte object for the transmission of values from 0 to 255 (corresponding to
values from 0 % to 100 %). If the adjustment of the value is enabled, the
object can transmit telegrams cyclically after long actuation with which the
value can be reduced or increased by a presettable amount.
1: For reading, the R-flag must be set. The last value written to the object via the bus or by the
device will be read.
2: For reading, the R-flag must be set. The last value written to the object via the bus will be
read.
Page 27 of 143
Software "Rotary sensor with extensions 10FE1x"
Object table
