Art. No. DS 4092 TS
Time for standstill after
each operation
300ms
500 ms
1 sec
2 sec
The device differentiates between
different operations based upon the time
that the rotary knob stands still after a
completed operation. This standstill time
is configured here and should not be
selected too short in order to avoid
unintended switching operations -
particularly during fast operations. If the
device detects additional operations
immediately after a rotary movement
(time not yet elapsed), it then ignores
the continuing movement of the rotary
knob. The time for standstill detection is
retriggered for each rotary knob
movement.
The following parameters are visible for the function "Dimming"...
Operation concept
The rotary knob function "Dimming"
differentiates between four different
operation concepts.
Dimming without OFF
telegram
This operation concept only outputs
relative dimming commands with a step
width of 100% during a rotary knob
movement. Stop telegrams stop a
dimming process at the end of the
operation. It is thus possible to set any
brightness values of a lighting system,
for example. Switching telegrams are
not transmitted by the rotary knob to the
actuator in this configuration.
Dimming with OFF
telegram
This operation concept functions in the
dimming process just like the concept
"Dimming without OFF telegram", the
only difference being that the device can
also switch off the activated actuator by
means of a rotary knob operation. Since
this operation concept performs
switching and dimming, it can be used
autonomously without any additional
operating elements.
Dimming Comfort without
OFF telegram
This operation concept supports the
operation of the rotary knob for dimming
dependent on speed and rotation angle.
Here, depending on the speed of
rotation, relative dimming is possible by
small and large step widths, thereby
allowing the brightness of a lighting
system to be set finely and gradually.
Switching telegrams are not transmitted
by the rotary knob to the actuator in this
concept.
Dimming Comfort with OFF
telegram
This operation concept functions in the
dimming process just like the concept
"Dimming Comfort without OFF
Page 109 of 143
Software "Rotary sensor with extensions 10FE1x"
Parameters
