Art. No. DS 4092 TS
"1" = ---
"0" = mode inactive /
"1" = mode active
"0" = mode active /
"1" = mode inactive
"0" = mode inactive /
"1" = ---
"0" = --- /
"1" = mode inactive
this parameter depend on whether the
energy saving mode can only be
activated, only deactivated or activated
as well as deactivated via the object.
Time for energy saving
mode
Minutes (1...59)
1
...59
This parameter defines the time that
must elapse after an operation so that
the device activates the energy saving
mode. Each operation or status change
of the signals at the extension inputs
restarts the time.
Setting the delay time minutes.
This parameter is only visible when the
energy saving mode is to be activated
automatically by time.
Seconds (0...59)
0
...59
Setting the delay time seconds.
This parameter is only visible when the
energy saving mode is to be activated
automatically by time.
Page 141 of 143
Software "Rotary sensor with extensions 10FE1x"
Parameters
