Art. No. DS 4092 TS
The "Time for standstill after each movement" is configured in the ETS and should not be
selected too short in order to avoid unintended scene recall operations - particularly during fast
operations. If the device detects additional operations immediately after a rotary movement
(time not yet elapsed), it then ignores the continuing movement of the rotary knob. The time for
standstill detection is retriggered for each rotary knob movement.
i
If the direction of rotation changes without interruption during an operation, the rotary knob
does not transmit any further telegram. The device evaluates this operation as a wrong
operation.
i
The rotation angle (number of notches during a rotary movement) and the speed of rotation
have no significance for the function "Scene extension". During a new operation, a
telegram is already transmitted to the bus after the first notch (minimum rotation angle).
i
It is not possible to save a scene with the rotary knob function "Scene extension".
Page 73 of 143
Software "Rotary sensor with extensions 10FE1x"
Functional description
