Art. No. DS 4092 TS
4.2.4.8 Delivery state
In the delivery state, the device reacts to operations, but does not send any telegrams to the
bus. Operations of the rotary knob and push-button cause the integrated buzzer to output an
operation tone thereby enabling the device to be easily tested for function. During a clockwise
rotary knob movement, a signal tone is output at the highest volume for the duration of one
second. Immediately afterwards, 3 more signal tones with decreasing volume follow with a
duration of 0.5 seconds each. During an anticlockwise rotary knob movement, the volume of the
acoustic signal is increased. The device then outputs a signal tone at the lowest volume for the
duration of one second. Immediately afterwards, 3 more signal tones with increasing volume
follow each with a duration of 0.5 seconds.
During an operation of the push-button, the signal transmitter outputs a short tone.
The extension inputs of the device have no function in the delivery state.
If the rotary sensor has not yet been programmed with application data by the ETS, the Status
LEDs flash at a slow rate in an alternating pattern (approx. 0.75 Hz). The same happens if the
device is unloaded by the ETS. In this case, the delivery state described above cannot be
restored. An unloaded device no longer reacts to operations.
After programming in the ETS, the described behaviour of the delivery state is no longer active.
The device then behaves according to the configuration.
Page 94 of 143
Software "Rotary sensor with extensions 10FE1x"
Functional description
