USER INTERFACE
2.13.2018
39
The >Start time< button will then
display the current setting.
Press
for normal view. The
normal display will show the
current time, the selected start
time, and the remaining time until
starting.
Before starting:
This area at the lower left is a
button that turns orange when
touched.
New buttons will then appear in the
center of the screen.
You
can
still exit the start phase by
pressing >
Abort
<.
After starting:
The following values will be shown
at the bottom left of the normal
display:
The computed setpoint
The current step's remaining
time
Current step /
remaining number of runs
Time remaining in profile
This area at the lower left is a
button that turns orange when
touched.
New buttons will then appear in the
center of the screen.
Pause/Resume
"Pause" will stop the progression of
a profile.
Press "Resume" to restart.
Abort
The program will end; return to
normal display.
Edit
Refer to >Edit a profile< on page
34.
Pause/Resume
The setpoint and both remaining times will be paused.
Visible on the display: Remaining time:
Pause