USER INTERFACE
2.13.2018
87
11.5. "Unit name" menu
Use the keypad to enter the
name
Example: A40 and Barcode
Then use the mains switch to
switch the unit off and switch it
back on approximately 4 seconds
later.
It will now be easier to identify the
unit in the ethernet.
At delivery every unit has a name which can be changed here.
11.6. Save/load parameters
Once the optimum settings of the parameters of an application
have been determined, this menu will enable you to save these on
an external data carrier. It is therefore possible to specify various
unit settings which can be used over and over again or can be
transferred to additional units.
Important Note:
Unit data can only be exchanged between identical models.
Examples:
A40 to A40 / W40 to W40
Not possible from A40 to W40
Please insert data carrier, e.g. USB
stick.