"Connect unit" menu
68
2.13.2018
The current value must be set to flow.
The 4 mA and 20 mA values must be
defined according to the connected flow
sensor. The filter time can be adjusted by
the user.
Next, the bypass control can be activated
in the “Determine thermodynamics” menu.
To do this:
The activated bypass control can be
recognized on the red
icon (at the
JULABO lettering). With this control, the
pump is automatically adjusted to stage-
based control. The stages can be freely
selected.
The flow rate values can be adjusted in the
requested pressure stage (1-4).
10.5.4. Pump control
The flow rate of the bath fluid can be
adjusted via the pump as well.
Similar to bypass control, a flow sensor
must be connected to the JULABO
pressure/flow socket and configured.