manualshive.com logo in svg

Julabo Presto Series, Operating Manual, Page: 9 / 121

Share
Download
Julabo Presto Series Operating Manual Download Page 9

USER INTERFACE 

2.13.2018

 

 

9 

ALARM display  

Error messages are displayed in a 
red box. 
 

Resolution for example E14: 

 
Touch the red box to  

 mute the alarm.  

Press <

> button for help text.  

 
The module and the configuration 
are displayed. 

 

Follow the instructions in the help 
text.  

 

 

Press <

> button.

 

  

 
 
 

Press <

> button again for help 

text.  

 

 

Press <

> button. 

.

   

 

 

 

 

 
 
 
Another error message (E108) 
appears and describes a pathway 
for overcoming the alarm. 
 

Press <

> button for help text. 

   

 

 
Follow the instructions in the help 
text.  

 

 

 

The unit is now ready to continue 
operation. 
 

 

The unit switches to „Standby“. Heater, refrigeration unit and 

circulation pump are switched off.  

 

   

  

 

 

Error message (E 14) remains although the safety temperature 
has been raised.

 

  

  

 

 

A <Reset> is not permitted in this case because, according to 

NAMUR, this condition must be resolved via hardware.  

Errors not subject to this regulation are resolved via 

<Reset>.

 

 

 

 

 

 

Not all alarms may be removed on-site.  

List of all error messages see page 108  

 

 

Summary of Contents for Presto Series


























































































































Reviews:

No comments