USER INTERFACE
2.13.2018
19
4.2. "Autostart" menu
Switch Autostart on/off
Allows the direct start of the temperature control systems via the
mains power switch.
>
Autostart
<
Note:
The temperature system has been configured and supplied by
JULABO according to N.A.M.U.R. recommendations. This means
for the start mode, that the unit must enter a safe operating state
after a power failure (non-automatic start mode). This safe
operating state is indicated by "OFF", on the TFT-Display. A
complete shutdown of the main functional elements such as heater
and circulation pump is effected simultaneously.
Using the AUTOSTART function is only possible when a set-point
is set via >TFT Display< and >EPROG-input<.
Should such a safety standard not be required, the AUTOSTART
function (automatic start mode) may be activated, thus allowing the
start of the instrument directly by pressing the mains power switch
or using a timer.
4.3. "Units" menu
The buttons will display the current
settings.
Select the temperature units
°C or °F
Select pressure units
bar or psi
Select flow rate units
l/m or gpm