P/N 960-100929R_Rev. 3 {EDP #148849}
© 2012, Japan CashMachine Co., Limited
4 - 7
Disassembly/Reassembly
iVIZION® Series Next-Generation Banknote Acceptor Unit
Section 4
Validation Sensor Board Assembly
Removal
To remove the Validation Sensor Board Assembly,
proceed as following:
1. Remove the four (4) Cover Mounting Screws
1
through a
4
) located on the
base side of the Validation Unit, and remove the
iVIZION
®
Head Cover “A” (See Figure 4-26 b)
off the Validation Assembly.
2. Remove the two (2) mounting Screws (See Figure
1
& a
2
) and take Grounding Plate “A”
(See Figure 4-27 b) off the Validation Unit.
3. Remove the two (2) screws (See Figure 4-27 c
1
&
c
2
) retaining the Validation Sensor Assembly
Board.
4. Unplug the two (2) FPC Cables (See Figure 4-27
d
1
& d
2
) and the two (2) FFC Cables (See Figure
1
& e
2
) from the Validation Sensor Assem-
bly Board.
5. Take the Validation Sensor Board Assembly
(See Figure 4-27 f) off the Validation Unit.
Figure 4-24
Upper Cover Removal
a
1
a
2
a
3
a
6
a
4
a
5
b
Figure 4-25
Sensor Transfer Board Assembly,
CIS FFC, Transmissive Light &
Upper UV FPC Cable Removal
a
2
a
1
b
c
d
e
1
e
2
f
Figure 4-26
iVIZION Head Cover A Removal
a
1
a
2
a
3
a
4
b
Figure 4-27
Validation Sensor Board Assembly
Removal
a
1
a
2
b
c
1
c
2
d
1
e
1
e
2
d
2