P/N 960-100929R_Rev. 3 {EDP #148849}
© 2012, Japan CashMachine Co., Limited
1 - 2
Section 1
iVIZION® Series Next-Generation Banknote Acceptor Unit
General Information
Model Number Specifications
Table 1-1 lists the iVIZION
®
Model Number
Descriptions.
Type Descriptions
Table 1-2 lists the iVIZION
®
Type Number
Descriptions.
Software Descriptions
®
Software Number
Descriptions.
Precautions
The Figure 1-2 symbols are defined as follows:
1. (
Type 1
) Do not insert a torn, folded, or wet
Banknote into the Unit, as this action may cause a
Banknote jam inside the unit.
2. (
Type 2
) Do not expose the Unit to water. The
unit contains several precision electronic devices
which can be damaged if water or liquid of any
kind is sprayed or spilled into the Unit.
3. (
Type 3
) Do not install the Unit into a dusty
environment. Dust may affect and degrade the
Sensor’s performance.
User Cautions
Careful measures are taken in this product to
ensure its quality, however, the following Cautions
should be read and understood by all users in order
to confirm safe operation.
I
NSTALLATION
C
AUTIONS
1. Do not allow the Unit to endure or operate at a
high temperature, in high humidity and/or in a
dusty environment.
2. Do not install the Unit into an area where exces-
sive vibration or shock are present.
3. This equipment is not fully warranted for outdoor
use. Be sure that the Host Machine contains
enough protection to avoid wet or dusty condi-
tions when installing it in both open-air and
indoor spaces.
4. Avoid exposing the Unit to direct Sunlight and/or
Incandescent Lamp illumination having a Gradi-
ent Angle of 15 Degree or more, and illumination
index of 3000 Lux or less.
5. Insure that the Host Machine is designed for
daily operational access such as maintenance
and/or clearing a Banknote jam.
Table 1-1
iVIZION Model Number Specifications
N
o
Model: iVIZION - * * * - SS
N
o
(1)(2)(3) (4)
(1)
Validation Head
1: Standard
2 - 9: Reserved
(2)
CPU Board (Memory)
0: Standard
1 - 9: Reserved
(3)
Transport Unit Type
0: Standard
1 - 9: Reserved
(4)
Stacker Type
SS: Security Stacker Down
LD: Less Down (No Stacker)
Table 1-2
iVIZION Type Number Specifications
N
o
Type: * * * - 00 - * * * * *
N
o
(a)(b)(c) (d) (e)(f)(g)(h)(i)
(a)
Box Capacity
*
5: 500 notes (New Banknote)
9: 900 notes (New Banknote)
0: No Cash Box
*. The numbers of stacked Notes depends on the Banknote’s condition.
(b) Box Type
0: Standard
(c) Box Handle
0: Standard
(d) Transport Unit Type
00: Standard
(e)
Bezel (Option)
0: Without Bezel
1: With LED Bezel (UBA Standard 85)
(f)
ICB (RFID Type)
0: None
1: ICB-Compliant (Standard) (for SS Version Only)
(g)
Optional Board (Memory)
0: Standard Memory (64M Bit)
1: Memory Extension Board (128M bit)
2: Memory Extension Board (192M bit)
(h)
Input/Output Signal Selection
P: Photo-Coupler Isolation (Standard)
R: RS232C
(d)
External Harness Type
0: No Harness
1: Standard Harness (One side cut)
2: Harness (with USB I/F Cable) (One side cut)
3: Harness 2 (with Connector and USB I/F Cable)
Table 1-3
iVIZION Software Number Specifications
N
o
Software: iVIZION-100-SS * * * - * * * - V *.* *
N
o
(A) (B) (C) (D)
(A) Software Model Name
(B) Denomination (Country Code)
(C) Interface Protocol Name
(D) Software Version
Type 1
Type 2
Type 3
Figure 1-2
Precautionary Symbols
