![background image](http://html1.mh-extra.com/html/jcm-global/ivizion-ld/ivizion-ld_operation-and-maintenance-manual_640273017.webp)
P/N 960-100929R_Rev. 3 {EDP #148849}
© 2012, Japan CashMachine Co., Limited
1 - 3
General Information
iVIZION® Series Next-Generation Banknote Acceptor Unit
Section 1
M
OUNTING
, D
ISMOUNTING
& T
RANSPORTATION
1. Be sure to turn the Power OFF before mounting
or removing the Unit from its permanent loca-
tion. Plugging or unplugging Connector Plugs
from their receptacles while the Power is ON
may cause damage to the Unit.
2. When
reassembling
a
disassembled Unit Part,
ensure that the each part is properly replaced in
its correct original location.
3. Be sure to carry the Unit by both hands when
transporting it. Holding the Unit by one hand
may cause personal injury if the Unit accidently
becomes disassembled and drops away.
4. Be careful not to use excessive outside pressure
on the Unit, or subject it to excessive vibration
during transportation.
P
REVENTIVE
M
AINTENANCE
1. Be sure to turn the Power OFF before beginning
a maintenance procedure. The equipment can
produce abnormal operating signals while in
maintenance mode that may cause personal
injury.
2. If the Validator Section is dirty due to dust, for-
eign objects or other such debris adhering to it,
Banknote acceptance rates will degrade. Clean
the Unit once a month to keep its performance
stable.
3. Use a soft, lint-free cloth, cotton swab or a com-
pressed air spray to clean dust and debris from
the Banknote path.
4. Do not disassemble the Unit incorrectly or rede-
sign it in any way. Unauthorized use by inade-
quately trained personnel, or use outside the
original manufacturer’s intent for operation voids
the warranty.
5. When the Unit is exposed to liquid such as water,
wipe and thermally dehydrate dry the wet areas
immediately. Remaining liquid fluids may affect
and degrade the Sensors and the Validation
Section’s performance.
B
ANKNOTE
F
ITNESS
R
EQUIREMENTS
The following Banknote types may not validate
correctly, or can cause a Banknote jam and/or dam-
age to the Unit’s Transport path. Banknotes exhib-
iting the conditions listed below and illustrated in
Figure 1-3 should be avoided:
•
Torn
•
Having excessive folds
•
Dirty
•
Wet
•
Having excessive wrinkles
•
Adhering foreign objects and/or oil.
R
EFERENCE
P
APER
U
SE
P
RECAUTIONS
When calibration using the
KS-072
Reference
Paper is complete, proceed as follows:
•
Ensure that the Reference Paper Carrier is kept in
an upright position following use (See Figure 1-4 a)
or, replace it into its protective Shipping Carton
when calibration is complete (See Figure 1-4 b).
•
Do not lay the Reference Paper Carrier down on
any irregular surface, otherwise the Reference
Paper may become wrinkled making it useless for
future calibration use.
•
ALWAYS return the
KS-072
Reference Paper into it
protective Shipping Carton following each use.
Caution: DO NOT use any alcohol,
solvents, scouring agents or citrus
based cleaners that can damage
the plastic surfaces of the device
when cleaning it.
Caution: Make Interface Harness
connections to the Host Machine
shorter than 9.84 Feet (3 Meters) in
length. Cut off all unused portions
of the Interface Harness wiring to
avoid static electrical effects or
short circuit possibilities that
could cause damage to the Unit.
WARNING: This Unit is designed
for use with a Current limiting
Power Source! Design the Host
Cabinet space to meet all local
related safety standards.
Figure 1-3
Unacceptable Banknotes
Damaged Banknotes
Wrinkled Banknotes
Curled Banknotes
Folded or Partial Banknotes
Figure 1-4
KS-072 Reference Paper
Handling Precautions
a
b
KS-072
Reference
Paper
KS-072
Reference Paper
Shipping Carton