JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de
- 78 -
The softkey have the following functions:
M-CLR:
delete a marker
M-ADD:
enter a marker
PLAY:
play the show from begin
à
PLAY:
play the show from a certain moment
A-PLAY:
play only a loop
FADE:
enter fadetime
LOOP:
activate the loop function
TRACK-/+:
search for a track
FRAME -/+:
move the time axis
ZOOM-/+:
zoom in and out of the time rate
Timeline programming means that cues and chases which have
been programmed before will be assigned to a certain point of time within a music track.
During the process of programming the timeline cues and chases will be called EVENTS.
18.3.1 Assign cues and chases (Events)
Put in the music CD and start the desired track. (softkey PLAY)
Press the desired cue keys or chase keys to assign cues and chases while the track runs.
(cues and chases have to be pre-programmed!)
18.3.2 Move cues and chases
To move an event to the right position within a music track activate LOOP function while programming.
Press softkey LOOP to activate LOOP function.
If LOOP function is activate a loop will be placed automatically during the process of programming an event.
This loop will be displayed by two small marks on the display. (See track “M” on the display).
The event can now be moved within this loop:
Us the encoder-wheel which is located in the middle to enter the time the event should be moved forward or
backward.. You can check the time on the display
à
OFS: 00:00:00
The event will be moved after confirming the time by pressing softkey MOVE
The softkey MOVE will only be displayed after the encoder-wheel has been turned.
Dieser Vorgang kann beliebig oft ausgeführt werden.
This process can be repeated as often as necessary.
To leave this loop and go on with programming press softkey
à
PLAY.
The track will run from the loop.
To enter a new event press cue key or chase key.
If an event should be moved later on use the function EDIT
