JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de
- 74 -
After the name was entered the storage process can be confirmed by pressing the softkey EXEC.
During the process of data storage the message: Writing data.... will be displayed.
Data storage has been successful when status COMPLETE is displayed.
17.2.1 Selective storage of presets
Presets which have been stored for a user defined fixture can be stored selectively on a floppy disc.
Chose from the BACKUP/SAVE menu the function PRESET. Afterwards select softkey SINGLE. Then use
the encoder wheel on the left hand side to selectthe desired fixture. Name the file and execute process by
pressing the softkey EXEC.
17.3 Selective re-load of data into the desk
Data from floppy disc back up can be re-loaded into the desk according to the data groups descibed in
chapter 16.2.
Select the menu by prssing the softkey BACKUP and chose function LOAD.
Select which kind of data you want to re-load into the desk by pressing theaccording softkey.
TILINE: Timeline data
MEMORY: Cues/Chases /Sequence Daten in Fixture- and PAR-
section
PRESET: programmed PRESETS of Fixtures
CONFIG: Config data
L-USER: data of self-defined fixtures
ALL:
all data stored in the desk
After selection the display will show the directory of the stored data.
Use the encoderwheel situated in the middle to select the desired file.
If you want to check the complete list of files stored on the floppy disc, press softkey DIR (Directory). The
files attachments will provide you with information on which kind of data is stored.
.LDA all/complete data of the desk
.LDT
Timeline data
.LDM Memory/ cue data
.LDP
Preset data
.LDC
Config data
.LDU
User scan data
