JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de
- 10 -
Then enter assignment of shutter and dimmer as they are administered separately
•
Adjustment of fixtures with shutter and dimmer one one channel
Assign feature shutter to the DMX channel. Press softkey BRIGHT and BLACKO to assign dimmer and
shutter (blackout) function to the same DMX channel. For confirmation please check display. There will be a
“B” and an “O” shown for brightness (dimmer) and blackOut (shutter)
•
Fixtures with separat DMX channels for dimmer and shutter:
Assign dimmer and shutter to the required DMX channels. Assign blackout function to shutter channel by
pressing softkey BLACKO. An “O” will be displayed.
Assign dimmer function to dimmer channel by pressing softkey BRIGHT. A “B” will be displayed.
•
Fixed channels:
Fixed channels are required for two different applications. First use fixed channels, when the dmx-value
stays the same all the time and is not going to be changed during the process of programming.
Second use fixed channels when the DMX protocol of the fixture has some not occupied channels.
To enter DMX value of a fixed channel use encoder wheel located on the right hand side.
INVERS
Use softkey invers to invert all functionas exept pan and tilt movement.
Use function if a channel works contrary to all other, for instant if the iris is open fully at a
DMX-value of “0” and closed at “255”.
After the inversion it will be closed at a DMX-value of 0 and open at 255.
CLEAR
Use softkey CLEAR to delete inversion
P-ANGL:
Maximum of pan movement amplitude. Use encoder wheel to enter data. If this value is
entered wrongly it might cause problems when working with preprogrammed moving
patterns later on.
T-ANGL:
Maximum of tilt movement amplitude. Use encoder wheel to enter data. If this value is
entered wrongly it might cause problems when working with preprogrammed moving
patterns later on.
BLACK-L:
Enter DMX value to adjust the level at which a black-out will be activated when shifting a
fader later on. (Blackout-Level) A DMX-value of 5 will serve most applications quite well.
à
press ESCAPE to leave menu
