JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de
- 46 -
Shutter chase:
„On“ value: shutter open
“Off” value: shutter closed
First step of the chase:
Fixture no. 1: shutter open
Fixture no 2 – no. 6: shutter closed
Second step of the chase:
Fixture no. 1: shutter closed
Fixture no. 2: shutter open
Fixture no. 3 – no. 6: shutter closed
Third step of the chase:
Fixture no. 1 – no. 2: shutter closed
Fixture no. 3: shutter open
Fixture no. 4 _ no. 6: shutter closed
And so on.
10.2 Parameters of the chase generator
The following chapters will explain detailed the function of the different parameters of the chase generator.
To make following the description more easy we decided to explain the different pages of the chase
generator from page no. 1 to page no. 6.
After the chase generator has been recalled like described in chapter 10.1 the pages can be switched by
means of the softkeys „>>>“ and „<<<“.
The number of the active page is marked in the squares next to the “>>>” and “<<<” sign, e.g. „ 2 (6)“ means
second page of six.
10.2.1 Page no. 1 of the chase generator (Preset selection)
On page no. 1 of the chase generator you will find the short
manual which was described in chapter 10.1 before.
Additionally there will be Presets visible which were stored for the
activated feature before. In this expample you see the Presets for
colour wheel no. 1 and colour wheel no. 2.
To change feature selection press one of the keys in the features
selection block.
To recall the desired Presets press the according softkey. If there
are other Presets than those which can be actually displayed use
softkey „<<<“ to switch to the other Preset-pages.
The chase steps switch from the „On“ values to the „Off“ values according to the selected chase pattern.
To enter “On” value proceed as follows:
Press softkey “On” until the square is displayed inverted.
Press on of the softkeys with a Preset stored or use one of the encoder wheels to enter DMX data.
To enter “Off” value proceed as follows:
Press softkey “Offuntil the square is displayed inverted.
Press on of the softkeys with a Preset stored or use one of the encoder wheels to enter DMX data.
