JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de
- 41 -
•
Trigpoint
Trigpoint describes the moment were all features which are not faded, will be switched. The features which
will be faded are marked with a fade-ramp in the store-matrix (
à
see 6.1.1 The store-matrix).
The trigpoint is entered in percent depending
on the duration/speed of the chase-step.
For example:
If the chase-steps duration is 5 seconds and
the trigpoint is 75% all features (which are not
marked with a fade-ramp) will be switched
after 3,75 seconds.
9.5 Insert a chase step
New chase steps are usually added to the list of steps.
If a step should be stored at a certain position uses encoder wheel which is located in the middle (STEP) to
scroll the cursor to the desired position.
As soon as the encoder wheel is turned a new function called INSERT will appear on the display.
Press softkey INSERT to insert step in list and to store values.
9.6 Overwrite a chase step
Select chase step by shifting cursor up and down. Press store key of combi-section to store the dmx-values
in the activated step.
9.7 Delete all chase data
If you want to delete all chase-steps press softkey CLEAR.
Press escape to leave menu. Don´t press store!
9.8 Delete a single step
If you want to delete a single chase-step use encoder wheel which is located in the middle to move cursor to
the desired step. Press softkey DEL ST. The step will be deleted immediately, the remaining steps will be re-
numbered.
