JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de
- 68 -
For chages in DMX values later on use either encode-mode or hilite function.
16.4 Hilite mode
To enter hilite-mode press one of the PAR keys located in the fixture section twice.
Then press softkey HILITE. The activated state of the hilite-mode
is shown by inversion of the display.
In hilite-mode the activated PAR channels will be switched on
and off one after the other.
The DMX value of the channel which is actually switched on can
be changed by means of the encoder wheels or the first fader
located in PAR section.
Field of application:
•
Comfortable change of DMX values from pre-
programmed presets, cues, chases and sequences.
This mode is used to locate a certain PAR channel.
After activating the hilite-mode, the first PAR channel will be
switched on and off.
Select PAR channel by means of left encoder wheel.
To enter DMX values use first fader in the PAR section or the
encoder wheel which is located in the middle.
After entering the DMX value of the active channel use encoder
wheel to select next DMX channel. Then use first PAR fader
again to enter the DMX value of the activated DMX channel.
16.5 Parout mode
To enter parout-mode press one of the PAR keys located in the fixture section
twice.
Then press softkey PAROUT. The activated state of the
PAROUT-mode is shown by inversion of the display.
The PAROUT-mode is used to take over the actual DMX values
of PAR section into combi section (without scaling the light
output by means of the left Master PAR fader).
