![JB-Lighting licon1 User Manual Download Page 51](http://html1.mh-extra.com/html/jb-lighting/licon1/licon1_user-manual_3491339051.webp)
JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de
- 51 -
Step no. 1:
Fixture no. 1
:
colour red
Fixture no. 2
:
colour green
Fixture no. 3-6:
colour blue
Step no. 2
Fixture no. 1
:
colour blue
Fixture no. 2
:
colour red
Fixture no. 3
:
colour green
Fixture no. 4-6:
colour blue
Copy the parameter of one step:
Select the desired step by means of the softkeys LIST- or LIST+ .
Press softkey COPY and hold it.
While holding the softkey COPY select one of the chase steps by means of the softkeys LIST – or LIST+.
Release the softkey COPY and the values of the selected step will be overwritten immediately and shown on
the display.
à
To confirm the process press the store key of combi-section.
After a short period of time the display will show the PROG COMB CHASE menu.
10.2.5 Page no. 6 of the chase generator (modification of the chase patterns)
On page no. 6 of the chase generator the pre-programmed chase patterns can be modified.
To start modification press softkey OPTIONS. You will find the following function displayed.
CH:COMB 1/D04
:
name of the chase key
(in this example: PAGE 1, BANK D; CHASE-KEY NO. 4)
TYPE
:
>------------- way the chase runs
(symmetrical, asymmetrical, double symmetrical)
LENGTH
:
number of chase steps
(6 steps in this example)
FADE
:
ON/OFF
Fade on means the parameter can be faded, because it was
addressed with a faderamp in the store-matrix. Fade off means
the parameter can be switched only.
DIR : ----> direction of the pattern (in this example from left to right)
FLIPLINE :1
STEPSIZE :
STARTPOS:
LINEBUF :
LINE OFS :
TESTUNIT :
TYPE :
The softkey TYPE enable to switch type of the chase. Choose between: symmetrical, double
symmetrical, unsymmetrical, double unsymmetrical, four times symmetrical and four times unsymmetrical.
>----------- ; >-----------< ; >------>------ ; >---< >---< ; >---->---<-----< ; >--->--->--->
LENGTH:
LENGTH means the number of steps one chase contains.
The LENGTH can be varied by means of the encoder wheel situated in the middle.