![JB-Lighting licon1 User Manual Download Page 40](http://html1.mh-extra.com/html/jb-lighting/licon1/licon1_user-manual_3491339040.webp)
JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de
- 40 -
The values for the fadetime and trigpoint can
be entered in percent, depending on the
actuall speed (duration) of the step.
The main advantage is that fadetime and
trigpoint readjust themselfes if the speed is
changed.
If fadetime and trigpoint are entered in
fractions of a second they will not adjust
themselves if the speed is changed manually
later on.
The speed of a chase can be modified by
means of the keys in the chase-control section.
à
see chapter 12. Chase Control Section
•
Duration of a step (speed)
The duration of a step is entered by means of the encoder wheel which is located in the
chase-control-section
The duration can be modified manually later on by means of the keys and the encoder
wheel in the chase-control section.
•
Duration of the fadetime/percent
The fadetime accesses all features which have been marked with a fade-rape in the store-matrix.
(
à
see 6.1.1 The store-matrix)
If the fadetime is entered in percent, it will depend on the speed/duration of each cue.
For example:
If a chase-step lasts 5 seconds and fadetime is adjusted on 50 % all features will be faded in in
2,5 seconds.
The softkey LINK F has to be displayed inverted to enter fadetime in
percent.
The values will be entered by means of the left encoder wheel.
•
Duration of the fadetime/fraction of a second
The duration of the fadetime can be entered in factions of a second. If it is done this way it will not depend on
the duration of the step itself.
To enter the duration of the fadetime in faction of a second make sure that the softkey LINK F is not
displayed in an inverted way.
The values will be entered by means of the left encoder wheel. The values will be entered in steps of 0,0250
seconds.
Please remember if the speed/duration of a chase step is modified manually, the fadetime will not be re-
adjusted automaticall. If the fadetime needs to be re-adjusted it has to be done manually.
In general a fadetime is supposed not be last longer than the chase step itself.