JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de
- 13 -
2.3.3 Delete all start addresses
Enter patch menu by pressing softkeys CONFIG/PATCH.
Press softkey CLEAR. Choose from display to delete either fixture (scan), aux, par or all start addresses
à
to leave this menu press ESCAPE
2.4 PATCH Assignment of DMX channels to dimmer/PAR section
Enter config menu by pressing softkey CONFIG.
Select PATCH menu by pressing softkey.
SCAN 1:
DMX addresses of fixtures No. 1 – 16
SCAN 2:
DMX addresses of fixtures No. 17 – 32
AUX:
DMX addresses of AUX keys
PAR1:
DMX addresses of dimmer channels
1 - 16
PAR2:
DMX addresses of dimmer channels
17-32
PAR3:
DMX addresses of dimmer channels
33-48
PAR4:
DMX addresses of dimmer channels
49-64
PAR5:
DMX addresses of dimmer channels
65-80
PAR6:
DMX addresses of dimmer channels 81-96
A/B:
Selection of DMX output
CURVE:
Selection of dimmer curve
CLEAR:
Delete all DMX addresses
OPEN:
Delete DMX addresses selective
PATCH:
Confirmation of data input
left encoder wheel:
Enter DMX addresses
encoder wheel in the middle:
Moves cursor up and down
right encoder wheel:
Moves cursor to the left and to the right
2.4.1 Enter start addresses for dimmer channels
Up to four different DMX addresses can be assigned to each par key.
Select PAR list page one, by pressing the softkey PAR 1.
Use encoder wheels to move cursor up and down and to select the required position.
Select DMX output by pressing softkey A/B
Choose DMX address by turning the left encoder wheel.
Confirm input by pressing softkey PATCH.
