JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de
- 55 -
11.4 The sychronized start/Sync-start function
The SYNCST function enables the user to start
different chases at the same time. All chases assigned
to one speed group with sync start will start at the
same time, whenever on chases of this group is
activated.
The function sync start is similar to the function merge.
But while the function merge links two or more chases
sync start only effects the simultaneous start of the
chases and other parameters will not be influenced.
11.4.1 Enter sync start function
After assigning a chase to a speed group an new function called SYNCST will be displayed.
Press softkey SYNCST to activate function. The function is active as long as it is displayed in an
inverted way.
9.15.2 Delete sync start function
The function is active as long as it is displayed in an inverted way. Press softkey SYNCST to
delete function.
11.5 The sound function/beat count
Chases can run by sound signal. That means that the trigger for stepping the chase one more step further is
obtained by the bass beat of a sound signal connected to the desk.
The female jack plug is on the backpanel of the Licon1.
The bass fequency is factory set and can not be changed.
The number of bass beats on which the chase will be stepped further can be adjusted.
à
see chapter 12.8 Soundfunction and beat count
