Javad TRIUMPH-LS, User Manual

Page: 77 / 168

www.javad.com
77
Stake Out Alignments
Figure 34
Codes must have been defined beforehand (pressing
the “
Code
” field switches to screen which supports
only selection of existing codes. To enter new codes,
use ShapeTags & Codes commands on Home screen).
Also note that once the segments have been entered,
the “
Delete Segment ” ( ) button deletes the last
segment — there is no way to delete a segment in
the middle without deleting segments after it.
The horizontal distance of stakes, corresponding to
this segment, from the centerline will be 6 m, slope
will be -2%, and code we will arbitrarily call “ Curb ” (for
the purpose of this tutorial you may, of course, use
any other code including “ DefCode ”). Enter the values
by clicking and editing corresponding table fields
(Figure 35).
Figure 35
Tap left “
Add Segment
” ( ) button once more to
add second segment and set its fields to distance 5 m;
slope -60%; code — say, “ Ditch ” (Figure 36).
Figure 36
Note: The “ Distance ” field denotes distance from pre-
vious segment, not from centerline. So when we enter
segments with distances 6 and 5 m, it means that the