Javad TRIUMPH-LS, User Manual

Page: 21 / 168

www.javad.com
21
Introduction
Setting Up the RTK Base
Previously mentioned at the beginning of this discussion
was setting up your RTK Base on a known coordinated
position. It’s also worth noting that the RTK Base could
alternatively be up on an autonomous position with all RTK
collected points adjusted subsequent to post processing; a
subject not included in this article.
Once the base is set up, power on the TRIUMPH-2 and if
recording data, be sure to press the record button.
Refer to Appendix A
(
p. 163
)
for an explanation of the Blinking
LED lights on the TRIUMPH-2.
A Note About Antenna Heights
Antenna Heights are measured to the bottom surface of
the receiver. Slant heights are measures from the tip of the
pole on the ground to the arrow on the side of the receiver.
When using the 1/4”x20 to 5/8”x11 adapter, its height,
0.025 m, will need to be included in the antenna height
measurement.