Javad TRIUMPH-LS, User Manual

Page: 79 / 168

www.javad.com
79
Stake Out Alignments
There is one last step left — tap the “
Copy Left
to Right ” ( ) button to copy the whole left side
cross-section definition to the right side (Figure 39).
Figure 39
Tap “ Preview ” to see that cross-sections definition is
complete (Figure 40).
Figure 40
Entering Offset Points
If it is necessary to stake some separate points (e.g.
lamp posts positions) with known station/offset val-
ues relative to the alignment, Offset Points function-
ality can be used for that. To enter offset points, use
the
button on the Preview screen, or the “
Offset
Points
” button on the Alignment Summary screen.
Entering offset points is straightforward (Figure 41).
Figure 41
Just fill the “ Code ”, “ Station ” and “ Offset ” fields, press-
ing “
New Point
” or “
Copy
” ( ) to create each point.
Our two points will have equal code “ Post ”, station
value of 1+15, and offset values of +7.5 and -7.5 m
respectively, so it is better to use “ Copy ” button to
create the second point and change only offset value
(Figure 42).