Javad TRIUMPH-LS, User Manual

Page: 84 / 168

www.javad.com 84
Stake Out Alignments
o
Offset Points Only — only offset points
are staked, other alignment compo-
nents are ignored.
•
Reverse — the stakes generated according to all
other options are traversed in reverse order.
• Nodes Only
— the Stake Intervals setting is
ignored, stakes are put only at stations where
some of the alignment components change (at
joints between horizontal and vertical alignment
sections, at defined cross-sections) and at offset
points, like illustrated in Stake Intervals. This but-
ton switches to screen which controls generation
of intermediate stakes (this button is disabled if
the “Nodes Only” setting is checked, as in this case
no intermediate stakes are generated) as shown
in Line Stake Interval — interval between gener-
ated points on straight horizontal sections. Note
that point stations are aligned at the interval val-
ue multiples, for example if section starts at 0+95,
ends at 2+05 and stake interval is 50 m, the stakes
for that section are generated at stations 0+95,
1+00, 1+50, 2+00 and 2+05.:.
Figure 53
•
Stake Intervals . This button switches to screen
which controls generation of intermediate stakes
(this button is disabled if the “ Nodes Only ” setting
is checked, as in this case no intermediate stakes
are generated) as shown in Line Stake Interval —
interval between generated points on straight
horizontal sections. Note that point stations are
aligned at the interval value multiples, for exam-
ple if section starts at 0+95, ends at 2+05 and
stake interval is 50 m, the stakes for that section
are generated at stations 0+95, 1+00, 1+50, 2+00
and 2+05.:
Figure 54
o Line Stake Interval
— interval between
generated points on straight horizontal
sections. Note that point stations are
aligned at the interval value multiples,
for example if section starts at 0+95,
ends at 2+05 and stake interval is 50 m,
the stakes for that section are generated
at stations 0+95, 1+00, 1+50, 2+00 and
2+05.
o
Curve Stake Interval — interval be-