Javad TRIUMPH-LS, User Manual

Page: 71 / 168

www.javad.com
71
Stake Out Alignments
ue of the cursor, and the offset value is the distance
along the red line.
Buttons along the right edge of the screen are as fol-
lows:
Toggle display of design points and text la -
bels
Go to the Settings screen
Edit the section of the horizontal align -
ment nearest to cursor, or start entering
horizontal alignment if the latter is empty
Edit the section of the vertical alignment
nearest to cursor, or start entering vertical
alignment if the latter is empty
Edit the cross-section nearest to cursor, or
create first cross-section
Edit the offset point nearest to cursor, or
create first offset point
Finally, let us specify the coordinates of the starting
point of the alignment. Tap “
Esc
” to return to editing
screen, then the “ To start ” button ( ). Tap “ Coordi-
nates ” field to go to the Select Point Coordinates screen
(Figure 21). Here you can use various means to input
the starting point coordinates (note that elevation co-
ordinate is not used). After editing coordinates, press
“ OK ” to return to the starting point screen. Now you
can again tap “
Preview
” to go to the Preview screen
and with the help of coordinates indicated at low-
er right corner verify that the whole alignment has
changed its position without changing shape.
Figure 21
Now, let us pass to creating vertical alignment.
Creating Vertical Alignment
Tap the button on the Preview screen (or go back
until you get to the Summary screen and tap the “ Ver-
tical
” button) to create Starting Point of the vertical
alignment (Figure 22).
Figure 22