Laminar Research X-Plane 530 Quick Reference Download Page 1

Page: 1 / 29

2015-06-24

- Not to be used for real navigation -

-N

ati

-N

ati

Unofficial illustrated

X-Plane 10

GPS 530

Quick Reference

X-Plane is a product of Laminar Research, see http://www.laminarresearch.com and http://www.x-plane.com

All screenshots for this document have been created using X-Plane 10.36 (64-bit) on Microsoft Windows 7 Prof., 64-bit

The PC-12 screenshot has been created using Shade-Tree-Micro-Aviation PC-12 Model 12.47g (see http://www.shadetreemicro.com)

All rights belong to their respective owners.

This document is not to be used for real navigation.

It is aimed at flight simulation enthusiasts.

This document is provided „as-is“, without any express or implied warranty. In no event will the author be held liable for any

damages arising from the use of this document.

Summary of Contents for X-Plane 530






























Search results

Summary of Contents for X-Plane 530

Reviews:

Related manuals for X-Plane 530

Brands by name

Popular brands

Laminar Research X-Plane 530, Quick Reference

Search results

Summary of Contents for X-Plane 530

Reviews:

Related manuals for X-Plane 530

Brands by name

Popular brands