Iveco EUROCARGO, Instructions Manual

Page: 42 / 226

14
EUROCARGO Euro 6
–
CHASSIS INTERVENTIONS
CHASSIS INTERVENTIONS
2.3
RUST AND PAINT PROTECTION
–
Printed 603.95.747
–
1st Ed. - Base 12/2013
Precautions
On the vehicle
Appropriate precautions must be taken to protect parts on which paint could be harmful to the conservation and operation
thereof:
●
hoses for pneumatic and hydraulic systems in rubber or plastic, with particular reference to the braking system ;
●
gaskets, rubber or plastic parts;
●
drive shaft and PTO flanges;
●
radiators;
●
suspension, hydraulic/pneumatic cylinder stems;
●
air vent valve (mechanical assembly, air tank, thermostarter preheat tanks, etc.)
●
sediment bowl and fuel filter assembly;
●
plates, codes.
If painting is required after wheels are removed, it is necessary to:
●
Protect the wheel rim mounting surfaces on the hubs and the contact areas of the locking lugs/wheel studs;
●
ensure adequate protection of brake discs.
The electronic components and modules must be removed.
Engines and their electric/electronic components
Appropriate precautions must be taken to protect:
●
engine wiring and ground contacts;
●
the sensor/actuator side connectors and wiring side;
●
the sensors/actuators on the flywheel and on the flywheel rpm sensor mounting bracket;
●
pipes (plastic and metal) of the fuel circuit;
●
complete basic diesel filter;
●
the ECU and its base;
●
the entire internal part of the sound-proof cover (injectors, rails, pipes);
●
the common rail pump and its control valve;
●
the vehicle electric pump;
●
tank containers;
●
the front V-belts and relative pulleys;
●
the power steering pump and relative pipes.
▶
When painting is complete and before oven drying (max. temperature 80
°
C), the parts that risk
heat damage must either be removed or protected.