Iveco EUROCARGO, Instructions Manual

Page: 22 / 226

14
EUROCARGO Euro 6
–
GENERAL INFORMATION
GENERAL INFORMATION
1.15
DIMENSIONS AND GROUND
–
Printed 603.95.747
–
1st Ed. - Base 12/2013
1. Fixed loads
196792
Figure 5
Control at full load
Hv = Vehicle centre of gravity height (loaded)
Hs = Height of payload centre of gravity from the ground
Ht = Complete full-load vehicle centre of gravity height
Wv = Vehicle tare weight
Ws = Payload
Wt = Complete vehicle ground at full load
For any inspections with the vehicle set up without payload you can proceed similarly, assuming Ws is only the tare weight of the
superstructure (considering for Hv a value appropriate for the load and between the no-load cab version trim and the full-load
trim).
2. Mobile loads
In the versions where the load can be moved laterally while cornering (e.g.: suspended loads, liquid transport, animal transport,
etc..) high lateral dynamic forces may be generated which may jeopardise the stability of the vehicle.
With reference to the indications of the regulation ECE 111, special attention should therefore be paid to:
●
defining the height of the fitted vehicle's centre of gravity and at full load;
●
assessing the dynamic forces and the lateral displacement of the centre of gravity;
●
considering (for liquids) the density;
●
prescribing the implementation of adequate precautions for driving.
Any cases where evaluation is difficult should be submitted to IVECO for approval.