Iveco EUROCARGO, Instructions Manual

Page: 21 / 226

EUROCARGO Euro 6
–
GENERAL INFORMATION
GENERAL INFORMATION
1.15 DIMENSIONS AND GROUND
13
–
Printed 603.95.747
–
1st Ed. - Base 12/2013
In the realisation of the superstructure or containers, automatic loading and unloading of the goods transported must be provided
to avoid excessive variations of the distribution and/or excessive loads on the axles, providing information for users if necessary.
The Bodybuilder should also provide a suitable anchoring systems for the load on the superstructure, so that transport can occur in
maximum security.
196790
Figure 3
Even distribution of load Uneven distribution of load
196791
Figure 4
Even distribution of load Uneven distribution of load (attention to loads on axles
and minimum ratio)
Height of centre of gravity
For the cab version and no-load vehicle, the value of the height of the centre of gravity is shown on the specific technical docu-
mentation for each model (cab version diagram).
For the vehicle complete with super structure and full load, this height must comply with the maximum values allowed by national
or international standards, in particular, Directives ECE 13 on longitudinal stability and ECE 111 on lateral stability while driving.
The following cases should be distinguished:
1. fixed loads,
2. mobile loads;
3. loads that result in increased aerodynamic actions.