Iveco EUROCARGO, Instructions Manual

Page: 24 / 226

16
EUROCARGO Euro 6
–
GENERAL INFORMATION
GENERAL INFORMATION
1.16
INSTRUCTIONS FOR PROPER FUNCTIONING OF THE VEHICLE PARTS AND ACCESSIBILITY
–
Printed 603.95.747
–
1st Ed. - Base 12/2013
Variations on permitted masses
Special exemptions from the maximum permissible masses may be granted for specific uses, for which, however, there are precise
limits for use and reinforcements to be made to parts of the vehicle.
These exceptions, if they exceed the limits of the law, must be authorised by the Administrative Authority.
In the authorisation request, you must indicate:
●
type of vehicle, wheelbase, chassis number, intended use;
●
division of the tare weight on the axles (in fitted vehicles, e.g.: crane with flatbed), with the position of the payload centre of
gravity;
●
any proposals for strengthening the parts of the vehicle.
The permitted reduction of mass on vehicles (derating), can lead to interventions on some parts, such as suspension and brakes,
and may require a new calibration for the braking correction operation; in these cases the necessary indications may be provided.
1.16 INSTRUCTIONS FOR PROPER FUNCTIONING OF THE VEHICLE PARTS AND ACCESS-
IBILITY
In carrying out the transformations and applying any type of equipment, there should be no alteration to what enables the proper
functioning of the vehicle units and parts under various working conditions.
For example:
●
free access must be guaranteed to the places that need inspection, maintenance or periodic controls (e.g., battery replace-
ment, access to the air suspension compressor) and, in the case of enclosed superstructures, special compartments and doors
should be provided;
●
it must be guaranteed the free tipping of the cab and the possibility of operating the relevant pump; in Figure 1-6 are shown
the longitudinal space and the rotation radius of the available cabs, as well as the angle that the bar inserted in the pump must
have without obstacles in relation to the upper limit of the counter chassis;