Iveco EUROCARGO, Instructions Manual

Page: 84 / 226

56
EUROCARGO Euro 6
–
CHASSIS INTERVENTIONS
CHASSIS INTERVENTIONS
2.18
TRANSPORT OF HAZARDOUS MATERIALS (ADR)
–
Printed 603.95.747
–
1st Ed. - Base 12/2013
●
emergency switch
●
protected electrical connections
●
wiring protected with polyamide conduit
●
ADR approval plate
●
instructions on functioning
Note that with this option, the centralised closing of the doors can be activated only if the ADR transport is not running; Otherwise
the doors can be closed only with the normal keys.
What is still missing for the complete adjustment of the vehicle to the specific type of goods to be transported remains in charge of
the body builder.
For example: the realization of vehicles for the transport of category "OX - Peroxides" materials, for which the regulations require
that the windows of the rear wall of the cab have specific characteristics and so their frames. Since this is not within the content of
the ADR preparation given by IVECO, when ordering the vehicle must be chosen the optional 00741 "Without rear glazing”.
Note The complete transformation must still be authorised by the authorities responsible for the relative tests.
By way of example, below is some information concluded by the Regulation ECE/TRANS/WP.15/213 on the topic.
●
Electrical system.
Conductors suitably insulated and protected in ducts, protected from shock, stones, heat, etc.
Circuits protected from overvoltage with appropriate connections for use in hazardous environments, with fuses or automatic
circuit breakers.
Main power switch (excluding the tachograph, powered directly from the battery with suitable safety devices) placed near the
batteries, with direct or remote control in the cab and outside.
●
Braking.
Compliance with specific EC Directives.
Obligation of the anti-lock system (ABS) and a device for slowing down, in the cases provided by law.
●
Cab protection.
Use of fire-resistant materials, according to ISO 3795, with a burn rate not exceeding 100 mm/min; otherwise adoption of a
protective wall between the cab compartment and transport.
●
Exhaust system.
Suitable insulation for the components that reach temperatures above 200
°
C and cannot be moved in front of the protective
wall.
Exhaust outlet facing towards the outer side; in the event of transport of explosives, the ends must be equipped with a spark
arrester device.
●
Fuel tank.
Location protected from shocks; in case of spills or leaks, the fluid should flow directly on the ground.
●
Independent heater.
Safe with regard to protection against the fire; placed in front of the rear cab panel, at least 80 cm from the ground, with
protection of the heated parts.
●
Speed limiter.
Compliant with the ECE Directives in force.
●
Equipment.
At least two fire extinguishers and two portable lamps, independent from the vehicle's electrical system, whose operation can
not cause the combustion of the transported goods.
●
3rd axle.
Electric lifting device arranged outside of the chassis, in a waterproof box.