Iveco EUROCARGO, Instructions Manual

Page: 122 / 226

32
EUROCARGO Euro 6
–
APPLICATIONS OF SUPERSTRUCTURES
APPLICATIONS OF SUPERSTRUCTURES
3.8
INSTALLING A CRANE
–
Printed 603.95.747
–
1st Ed. - Base 12/2013
Considering that the necessary counter chassis rigidity depends on various factors (e.g. crane capacity, resting surface dimensioning,
vehicle tare weight, chassis overhang), instructions valid for all situations cannot be given. For this reason bodybuilders shall, if ne-
cessary, proceed also by testing the vehicle's stability. If the test results show that rigidity is insufficient, the bodybuilder will adopt
suitable precautions so as to obtain correct realisation.
The rear crane overhang (distance L
U
see Figure 3.24) must be as limited as possible (not exceeding 50% of the wheelbase) in or-
der to ensure good vehicle handling characteristics and acceptable levels of chassis stress.
For vehicles with additional liftable rear axle, the minimum load on the front axle must be tested with the rear axle raised (in coun-
tries where travelling with the vehicle in this condition is allowed) see Chapter 1.15 (
➠
Page 11)). The axle must be lowered while
travelling if the minimum required value is not obtained.
200450
Figure 24
1. Counter chassis on the entire body length
2. Plates
3. Brackets
4. Crane connections
5. Stabilisers
6. Connecting corner
Table 3.11 - Cranes on rear overhang (counter chassis secured with shear resistant plates)
Models
Frame
section
[mm]
Total torque M
G
max [kNm]
20
20
30 30
40 40
50 50
60 60
70 70
80
80
90
90
100
100
120 120
140 140
160
160
180
180
200
200
220
220
240
240
260
260
280 280
300
Minimum value for section modulus of counter chassis section W
x
[cm 3 ]
60E, 65E, 75E, 80EL 172.5x65x4 A A A 23 32 57 110 110 135 E
60E, 65E, 75E, 80EL 172 5x65x5 A A A A 23 32 57 71
110
E
80E, 90E, 100E 195.5x65x4 A A A A 23 42 71
110 110
E
80E, 90E, 100E
110EL (1) , 120EL (1)
195.5x65x5 A A A A A 23 32 57 71
110
E
110EL (1) , 120EL (1) 195.5x65x6 A A A A A 32 42 57 71
110 135
E
120E, 140E, 150E
110EW
240x70x5 A A A A A A A A 23 71
110
E
120E, 140E, 150E; 160E
150EW
240x70x6 A A A A A A A A 23 42 71
110 135
E