Iveco EUROCARGO, Instructions Manual

Page: 172 / 226

12
EUROCARGO Euro 6
–
ELECTRONIC SUB-SYSTEMS
ELECTRONIC SUB-SYSTEMS
5.2
BODYBUILDER CONNECTORS
–
Printed 603.95.747
–
1st Ed. - Base 12/2013
Pin Description
Wire
code
Max.
Load
Connected to Remarks
9 Gearbox neutral 8050 200 mA
VCM X1-07
EM X1-07
0 V = neutral not engaged
+24 V = neutral engaged
Input driven by EM, when installed
Else input driven by VCM
10 Reverse gear 2268 200 mA IBC3 E-16
0 V = reverse gear not engaged
+24 V = reverse gear engaged
11 K15 8871 5 A IBC3 B-01
K15
(after fuse)
12 CC Set+ 8156 10 mA VCM X3-33
Input signal
(2)
Open wire = Set + not activated
Ground = Set+ activated
13 CC Set- 8157 10 mA VCM X3-32
Input signal (2)
Open wire = Set - not activated
Ground = Set - activated
14 CC OFF 8154 10 mA VCM X3-30
Input signal (2)
Open wire = Off not activated
Ground = OFF activated
15 CC Resume 8155 10 mA VCM X3-31
Input signal (2)
Open wire = RES not activated
Ground = RES activated
16 CC Driver/BB 0152 10 mA VCM X3-49
CC activation by Driver or Bodybuilder (BB)
Open wire = CC controlled by driver
Connected to ground = CC controlled by Bodybuilder (BB)
17 Ground 0000 10 A Wiring Ground
18 PTO 1 sw 0131 10 mA
VCM X3-47
EM X3-5
Input signal (3)
Open wire = PTO mode 1 not activated
Ground = PTO mode 1 activated
Input driven by EM, when installed
Else input driven by VCM
19 PTO 2 sw 0132 10 mA
VCM X3-46
EM X3-6
Input signal (3)
Open wire = PTO mode 2 not activated
Ground = PTO mode 2 activated
Input driven by EM, when installed
Else input driven by VCM
20 PTO 3 sw 0123 10 mA
VCM X3-45
EM X3-7
Input signal
(3)
Open wire = PTO mode 3 not activated
Ground = PTO mode 3 activated
Input driven by EM, when installed
Else input driven by VCM
21 K30 7772 10 A IBC3 B-09 K30 (after fuse) (4)
(1)
Tachograph B7 Signal
Parameter Min Typ Max Unit Remarks
Voltage U
low
1,5 V I = 1 mA
Voltage U
high
5,5 V I = -1 mA
Frequency <1,6 kHz Square wave
Pulse duration 0,64 2 4 ms
The Tachograph B7 output provides the speed pulse according to ISO16844-2.