Isuzu N Series 2008, Owner'S Manual

Page: 181 / 580

4-53
CONTROLS AND INSTRUMENTS
CAUTION
If the ASR indicator light comes on amber while driving without operation of •
the ASR OFF switch, pull off to a safe place well clear of traffic and take the
following actions.
Stop the engine. -
Turn the starter switch to the "ON" position. The system is normal if the -
indicator light comes on first amber and then green before it goes out 2
seconds later. The ASR is operating satisfactorily.
If the indicator light does not go out, or comes on repeatedly, have the vehicle •
inspected/serviced at the nearest Isuzu Dealer as soon as possible.
ASR Indicator Light
V
When the starter switch is turned to the
"ON" position, the indicator light should
come on and change color from amber to
green before it goes out 2 seconds later.
This indicator light stays on green while
the anti-slip regulator (ASR) is in operation.
This indicator light comes on amber if there
is a problem with the ASR or when you
disengage the ASR using the ASR OFF
switch.
Anti-Slip Regulator (ASR)
V
→ Refer to page 4-120
Glow Plug Indicator Light
This indicator light comes on when
the starter switch is turned to the "ON"
position and goes out when preheating is
completed. When the indicator light has
gone out, the engine may be started.
Starting the Engine → Refer to page 4-4
Warm-up System Indicator Light
V
This indicator light comes on when the
warm-up switch is pressed. While this
indicator is on, the engine is warmed up.
Warm-Up Switch
V
→ Refer to page 4-63
2008N_sec04-1_print2.indd 53 3/09/2008 5:28:47 PM