Isuzu N Series 2008 Owner'S Manual Download Page 355

Page: 355 / 580

7-9

SERVICE AND MAINTENANCE

CAUTION

Take care to avoid jamming fingers,

•

hands or any other part of your

body when returning the seat

cushion to its original position.

In addition, confirm that the seat

cushion is firmly locked. A seat with

an improperly locked cushion will

be unstable during driving, possibly

causing an accident.

Inspection Hatches

Engine Maintenance Lid

Opening

1. Lift the catch levers located at the

front of the passenger's seat cushion

to release the lock.

2. Lift up the seat cushion and attach

the belt extending from behind the

seatback to the left catch lever to hold

the cushion in the raised position.

Closing

1. Detach the belt from the catch lever

and lower the seat cushion to a point

approximately 30 cm (12 in) above

its original position. Allow the seat

cushion to drop into place, and then

secure it using the catch levers.

2. Gently push and pull the seat cushion

to make sure that it has been securely

locked in place.

LNU770SH008301

Lever

Belt

Lever

Seat cushion

Catches

2008N_sec07-1_print2.indd 9

3/09/2008 5:47:18 PM

Summary of Contents for N Series 2008





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N Series 2008

Reviews:

Related manuals for N Series 2008

Brands by name

Popular brands

Isuzu N Series 2008, Owner'S Manual

Search results

Summary of Contents for N Series 2008

Reviews:

Related manuals for N Series 2008

Brands by name

Popular brands