Isuzu N Series 2008 Owner'S Manual Download

Page: 58 / 580

2-28

IMPORTANT INFORMATION

Carrying Children

Using Seat Belts with Children

WARNING

The vehicle's seat belts are designed for adults. If a seat belt touches a child's

•

neck or chin, or does not rest across his/her hips, use a baby seat, child seat or

junior seat. If the seat belt were used as it is, it could apply intense pressure to

the child's abdomen in the event of a collision. A small child who is not able to

sit up by him/herself must be placed in a child seat.

Do not fit a baby seat, child seat or junior seat on the centre seat. It could

•

hinder your driving.

If the vehicle has a passenger airbag, do not fit a baby seat, child seat or

•

junior seat facing rearward. If the baby seat, child seat or junior seat is facing

rearward, the impact on the child seat during deployment of the passenger

airbag could inflict life-threatening injuries on the child.

NOTE

The appropriate type of baby seat, child seat or junior seat and the proper

•

installation for it depend upon the weight and height of the child.

It may not be possible to correctly fit certain child seats depending on their

shapes. Be sure to use a child seat that is suitable for the vehicle.
*

For detailed instructions, see the instruction manual supplied with the baby

seat, child seat or junior seat.

Seat Belts → Refer to page 3-23

LNU720SH001501

Do not Leave a Child Alone in the Vehicle

WARNING

When you leave the vehicle, take

•

the child with you. If you leave the

child alone in the cab, the child

could interfere with things, causing

vehicle movement, a fire or some

other accident. Also, the cab inside

could become dangerously hot when

heated by the sun.

2008N_sec02_print2.indd 28

15/09/2008 10:36:37 AM

Summary of Contents for N Series 2008





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N Series 2008

Reviews:

Related manuals for N Series 2008

Brands by name

Popular brands

Isuzu N Series 2008, Owner'S Manual

Search results

Summary of Contents for N Series 2008

Reviews:

Related manuals for N Series 2008

Brands by name

Popular brands