manualshive.com logo in svg

Isuzu N Series 2008, Owner'S Manual

Share
Download
Isuzu N Series 2008 Owner'S Manual Download Page 536

8-16

IN CASE OF EMERGENCY

Brake Booster Warning Light

When the Warning Light Comes On

The warning buzzer will sound whenever 

the brake booster's vacuum becomes 

insufficient either with the starter switch 

in the "ON" position or during driving, 

whenever the hydraulic brake booster 

(HBB) system becomes faulty, or whenever 

a problem occurs with the exhaust brake 

while it is being used. The brake booster 

warning light will also come on.

CAUTION

If the warning buzzer should sound during usage of the exhaust brake, 

•

 

immediately park the vehicle in a safe place and take the following action:

With the engine still running, turn off the exhaust brake switch. A problem 

 -

in the exhaust brake system will be confirmed if the buzzer stops sounding 

several seconds later. Have your vehicle inspected by the nearest Isuzu 

Dealer.
If the warning buzzer continues to sound, the problem will be in the brake 

 -

booster for the foot (main) brake.  Have your vehicle inspected by the nearest 

Isuzu Dealer immediately.

2008N_sec08_print2.indd   16

4/09/2008   8:14:22 AM

Summary of Contents for N Series 2008





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands