Isuzu N Series 2008, Owner'S Manual

Page: 166 / 580

4-38
CONTROLS AND INSTRUMENTS
Engine Oil Pressure Warning Light
This warning light should come on when
the starter switch is turned to the "ON"
position, and then should go out after the
engine is started.
While the engine is running, this warning
light comes on if the engine oil pressure,
which lubricates the engine components, is
abnormal.
ADVICE
If this warning light comes on while the engine is running, immediately pull off to •
a safe place well clear of traffic.
The lubrication system may be faulty. Promptly have your vehicle inspected at •
the nearest Isuzu Dealer.
Engine Oil → Refer to page 7-22
Over Speed Warning Light
V
Model with Multi-Information Display
(MID)
The display will show this warning light
when the vehicle speed approaches
the speed that was set on the SPEED
WARNING screen of the MID.
CAUTION
If this warning light comes on while driving, immediately pull off to a safe place •
well clear of traffic and take the following actions.
Stop the engine. -
Restart the engine. Check if the ABS warning light comes on and then goes -
out. If it does, there is no problem. The ABS operates normally.
If the indicator light does not go out, or comes on repeatedly, have the vehicle •
inspected/serviced at the nearest Isuzu Dealer as soon as possible.
Even if a problem has occurred in the ABS, the brakes will still work as normal
•
brakes. In this case, the ABS has no influence on the operation of the brake
system.
Anti-lock Brake System (ABS)
V
→ Refer to page 4-115
2008N_sec04-1_print2.indd 38 3/09/2008 5:28:37 PM