Isuzu N Series 2008 Owner'S Manual Download

Page: 183 / 580

4-55

CONTROLS AND INSTRUMENTS

PTO Indicator Light

This indicator light comes on when the

dump control or power take-off (PTO) lever

is operated, or when the PTO switch is

pressed.

Power Take-Off (PTO)

→ Refer to page 4-128

LNU740SH001201

The 4WD indicator light comes on on the

instrument panel when the 4WD switch is

used to select 4WD operation. Whenever

you use the 4WD switch, check that this

indicator light has come on or gone out as

expected before driving.

4WD Switch → Refer to page 4-126

4WD Indicator Light

DPD Indicator Light

Model without Multi-Information

Display (MID)

The DPD automatic regeneration indicator

light (green) comes on while the DPD is

being automatically regenerated.
This indicator light comes on when the

starter switch is turned to the "ON" position,

and goes out when the engine is started.

This indicator light comes on when the

starter switch is turned to the "ON" position,

and goes out when the engine is started.
If the DPD manual regeneration indicator

light flashes, manual regeneration (PM

combustion) of the DPD needs to be

performed.

DPD automatic regeneration

indicator light

(Green)

DPD manual regeneration

indicator light

(Amber)

2008N_sec04-1_print2.indd 55

3/09/2008 5:28:49 PM

Summary of Contents for N Series 2008





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N Series 2008

Reviews:

Related manuals for N Series 2008

Brands by name

Popular brands

Isuzu N Series 2008, Owner'S Manual

Search results

Summary of Contents for N Series 2008

Reviews:

Related manuals for N Series 2008

Brands by name

Popular brands