Isuzu N Series 2008 Owner'S Manual Download Page 240

Page: 240 / 580

4-112

CONTROLS AND INSTRUMENTS

If you have canceled cruise control under the following conditions, you can return to

the cruise control driving condition before cancellation when you operate and release

the cruise control resume switch. The moment the resume switch is released, the

cruise control set indicator light comes on.

• When depressing the brake pedal.

• When applying the exhaust brake.

• When shifting gears.

• When operating the cruise control cancel switch.

When Returning to Cruise Control Driving

Auxiliary Brake Function

Automatic activation of the auxiliary brake (exhaust brake) during cruise control driving

suppresses an increase in the speed on a downhill slope, decreasing the need for the

driver to apply the regular brake pedal.

CAUTION

The maximum slope angle at which the system can control the vehicle speed

•

increase is different depending on the load the vehicle is carrying.

Automatic Activation and Automatic Release of Auxiliary Brake

• The auxiliary brake is engaged when the vehicle speed exceeds the set speed on

a downhill slope.

• The auxiliary brake is disengaged when the vehicle slows down close to the set

speed.

2008N_sec04-2_print2.indd 112

3/09/2008 5:31:54 PM

Summary of Contents for N Series 2008





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N Series 2008

Reviews:

Brands by name

Popular brands

Isuzu N Series 2008, Owner'S Manual

Search results

Summary of Contents for N Series 2008

Reviews:

Brands by name

Popular brands